Rigid connection to the building structure using angle/ strut supports

Equipment may have pre-installed brackets for angle support attachments as shown below in Figure 104.

Step 1: Attach the equipment to the building structure using threaded rods and anchors

Lay out all attachment points before anchoring. For building structure attachment details, see Figures 95-100. See Anchors. Rod stiffeners are not required.

Step 2: Attach anchors to the building structure for angle or strut supports

For building structure attachment details, see Figures 95-100. See Anchors.

Step 3: Attach angles or strut supports to the building structure

Step 4: Attach angle or strut to equipment